CP-CARRILLO Product Catalog

KRAMM-LOX

Are you tired of the tiem consuming task of installing conventional wire locks and damaging a perfectly good piston in the process? Well, no more with the KRAMM-Lox a non-rotating wire lock for pistons. “SURE-Lox” are able to withstand very heavy loads and high RPMs. They are designed to directly replace standard wire locks with no additional machining to the piston and “SURE-Lox” will not rotate in the lock groove even under extreme conditions. They are available in most wrist pin sizes. Kramm Lox installation tools make assembling much easier without deforming locks. For more information, please contact our sales staff! SURE-Lox Non-Rotating Wire Locks:

ID Part Number Pin Bore Dia Thickness 7126 551x040 SLX .551" .040" 9478 551x047SLX .551" .047" 7127 591x040 SLX .591" .040" 7125 591x050 SLX .591" .050" 7128 630x050 SLX .630" .050" 7130 669x050 SLX .669" .050" 7132 708x050 SLX .708" .050" 7133 708x063 SLX .708" .063" 7134 748x050 SLX .748" .050" 7135 748x063 SLX .748" .063" 7136 787x050 SLX .787" .050" 7137 787x063 SLX .787" .063" 8167 812x063 SLX .812" .063" 7138 827x063 SLX .827" .063" 7139 866x063 SLX .866" .063" 7140 866x073 SLX .866" .073" 7235 905X073 SLX .905" .073" 7850 927x063 SLX .927" .063" 7142 927x073 SLX .927" .073" 7143 945x073 SLX .945" .073" 7144 990x073 SLX .990" .073" 7145 1031x073 SLX 1.031" .073" 7146 1094x073 SLX 1.094" .073" 8696 1094x083 SLX 1.094" .083" 7479 1156x082 SLX 1.156" .082" 7409 1358x082 SLX 1.358" .082" 9252 1575X082 SLX 1.575" .082"

Kramm-Lox Installation and Removal Tools:

ID Part Number

Description

7147 7148 7149 7150 7171 7811 7812 7813 7814 7830 7816 7810 7809

KL 040 KL 050 KL 063 KL 073 KL- Clip KLT 050 KLT 059 KLT 063 KLT 073 KLT 083

Tool for .040 SURE-Lox Tool for .050 SURE-Lox Tool for .063 SURE-Lox Tool for .073 SURE-Lox

Replacement pin stopper for KRAMM/SURE-Lox tool

HARDWARE & ACCESSORIES

Interchangeable Tip for .050 Sure-Lox Interchangeable Tip for .059 Sure-Lox Interchangeable Tip for .063 Sure-Lox Interchangeable Tip for .073 Sure-Lox Interchangeable Tip for .083 Sure-Lox Interchangeable Tip - All Purpose

KLT 3

KLT 4090-L KLT 4090-S

KRAMM-Lox Interchangeable Install Tool w/2 Tips (.063 and .073) KRAMM-Lox Interchangeable Install Tool w/2 Tips (.050 and .063)

Kramm-Lox Installation: Take the open end of the lock and place it into the lock groove, right at the pick lock groove, push down on the lock 180° from the pick lock groove to ensure it’s engaged in the groove and top preload the lock. Place the Kramm Lock tool on the “tail” of the lock and pull back on the tool to collapse the lock in on itself while moving the tool and “tail” of the lock into the pick lock groove until the lock is fully seated.

185

949.567.9000

CP-CARRILLO.COM